Wood Floor Need Refinishing? Do It Yourself With These Simple Steps

DIY projects are the ultimate way to take pride in the changes you make around your home. They let you take charge of the entire project from start to finish. They're also a great way to learn how to do new things.

If you have a wood floor that needs some tender loving care, you may want to try refinishing it yourself. Here are some step-by-step instructions that will have your wood floor looking like new in no time at all.

Prepare the Wood

Before you refinish your wood floor, you'll need to prepare the wood for the new finish. Begin by removing the existing finish. An electric buffer will allow you to strip the surface and prepare it for refinishing. Place a 150-grit sanding screen on your buffer and buff the entire floor. Be sure to move your buffer in the same direction as the wood grain to avoid unsightly scratches in your flooring.

Remove the Dust

Dust and dirt can get stuck in the new finish, so be sure to thoroughly cleaning the entire floor once you're done with the buffing. Use your shop vacuum to pick up the initial dirt and debris.

Finally, place a soft towel or rag over a mop and attach it using several pieces of duct tape. Run the mop across your entire floor to pick up loose dust and debris. If the towel gets too dirty, toss it in the laundry, attach a clean towel and repeat the process.

Apply the Finish

Before you apply the new finish, be sure to have your plan mapped out. This will prevent you from painting yourself into a corner – literally. Starting in the corner farthest away from the door can prevent you from getting stuck in the room with no way to exit until the floor dries.

Fill your paint pan with the floor finish and dip your foam roller in the pan. Begin rolling the finish on to the floor in even motions, going with the grain of the wood. Once the first coat has been applied, allow it to dry for several hours before applying the second coat. You may want to let it dry overnight to make sure it's thoroughly dry.

Once the second coat of finish is completely dry, you'll be ready to apply the water-proof sealant. The sealant will protect against damage and leave your floor with a lustrous shine. You'll apply the sealant the same way you applied the finish. Be sure to let each coat dry thoroughly before applying the next coat.

You want to take care of home improvement projects by yourself. These instructions will help you refinish your wood floors. If you run into problems, be sure to contact a professional flooring expert like Cooper Floors. They'll be able to help you with your refinishing project.